
North Salt Lake Foundation Pros
Concrete Lifting in North Salt Lake, UT
Polyurethane concrete lifting in North Salt Lake, UT raises sunken slabs without tear-out. Dime-sized holes, same-day results, free estimates.
Serving North Salt Lake and nearby communities.
Freeze-thaw cycling under slabs along the Wasatch Front creates voids that sink driveways, patios, and sidewalks over time, and once that void forms the slab has nowhere to go but down. North Salt Lake Foundation Pros raises sunken concrete with polyurethane foam injection instead of tearing it out and repouring.
This is the polyjacking method, not old-style mudjacking slurry: dime-sized holes, hydrophobic foam that expands beneath the slab, and a drivable or walkable surface the same day. It covers driveways, patios, and sidewalks under one approach, with each surface getting its own panel-by-panel assessment.
What's included
What's Included
Typically included: slab assessment, access hole drilling, foam injection and lift, hole patching to match the surface. Optional: joint resealing, slope correction for drainage. Customer prep: clear the slab area of furniture, vehicles, or planters before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Concrete Lifting Process Works
Step 1Surface Assessment
Sunken or sloped sections are measured to see how much lift each panel needs.
Step 2Drilling Access Holes
Small holes go into the concrete to reach the void beneath without breaking up the slab.
Step 3Material Injection
Expanding foam is pumped under the slab and lifts it evenly as it cures.
Step 4Elevation Monitoring
Lift height is checked throughout so the slab stops at the right level, not past it.
Step 5Hole Patching
Drilled holes are filled and finished to blend with the surrounding concrete.
Step 6Final Inspection
The lifted area gets a level check and visual review before the crew leaves.
Materials
Materials and Methods for Concrete Lifting
Slab voids here usually trace back to winter freeze-thaw movement under the base material, so the lift has to fill that space completely, not just float the slab on top of it.

Polyurethane Foam
Expands beneath the slab within minutes, filling the void and lifting the concrete without adding the weight that caused the original settling.

Injection Ports
Set at precise points across the slab so foam reaches every low section instead of just the one access hole.

Patch Compound
Fills the dime-sized drill holes flush with the surface once the lift is confirmed level.

Surface Sealant
Applied over patched areas to block moisture from re-entering the same void path.

Leveling Gauge
Tracks slab elevation in real time during injection so lift height stops exactly where it should.

Bonding Agent
Helps the patch material grip the original concrete so repaired spots don't chip out later.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Concrete Lifting Take?
- 01
Stage 1
same dayMost lifting jobs finish in a single visit since foam cures fast enough to use the surface the .
- 02
Assessment and drilling
same day - 03
Foam injection and lift
a few hours
- 04
Patch and final check
same visit, surface usable shortly after
Need a schedule that fits?
Get a Free EstimateBefore & after
Before and After Concrete Lifting

Before 
After
FAQs
Concrete Lifting FAQs
How long does polyurethane concrete lifting last compared to mudjacking?
Polyurethane foam is lighter and hydrophobic, so it doesn't break down or wash out the way mudjacking slurry can over time. It tends to hold its lift longer, especially through repeated freeze-thaw seasons.
What's the difference between piering and slabjacking?
Piering supports structural foundations by transferring building weight to stable soil. Slabjacking (or polyjacking) lifts non-structural slabs like driveways and patios by filling the void underneath, different problems, different fixes.
Does concrete lifting work on all slabs?
Most slabs with a void underneath qualify, but a slab with extensive cracking or a broken structural edge may need replacement instead.
How much does concrete lifting cost?
Cost runs by square footage and how much lift each panel needs. It typically comes in well under the cost of tearing out and repouring the same area.
Can I walk or drive on it right away?
Most surfaces are usable within hours once the foam cures, though exact timing depends on surface temperature and foam volume used.
Next step
Get a Concrete Lifting Estimate in North Salt Lake
Call (435) 296-3740 or request a free estimate, we'll tell you if lifting is the right call or if replacement makes more sense.
More services
Other Foundation Repair services

Foundation Repair
Foundation repair in North Salt Lake: pier installation, crack sealing, and wall stabilization backed by a free, written estimate.

Piering and Underpinning
Piering and underpinning in North Salt Lake with steel push piers and helical piers, sized to bench or valley soil, free written estimates.

Wall Stabilization
Wall stabilization in North Salt Lake, UT. Steel anchors, carbon fiber straps, and brace systems for bowing basement walls. Free estimate.
Ask about Concrete Lifting
Tell us about the project and how to reach you.